Indoff - Column Protectors - Weblog

Installing Standard Bollard Covers

Tue, 16 Mar 2010 16:15:50 CDT

Our standard bollard covers (1/8" thick) do not come with installtion double faced tape or tabs like the Heavy Duty models (1/4" thick). One suggestion by the factory is to utilize foam insulation from a can. The expanding foam locks the bollard cover in place! This is a quick way to attach them.

Vehicle Stopper Installation

Fri, 12 Mar 2010 14:50:43 CST

While installation of the Vehicle Stopper series of protective guard rails with base plates is common to our column protector products, the core in option adds real beef in stopping power:

Standard Bollard Cover Applications

Thu, 11 Mar 2010 08:45:23 CST

Our Standard Bollard Covers have found applications in:

Loading Docks

Building Protection

Electrical Equipment

ATM Machines

Drive-Thru Windows

Parking Lots

Overhead Door Areas

Storage Facilities

Warehousing

Construction Jobsites

Pretty much where you find bollards and like column protection products to keep them looking good.

Bollard Cover Photos

Thu, 18 Feb 2010 08:53:12 CST

Here are additional bumper cover photos, inside or out enhance the appearance of your Bollards and minimize your on going maintenance costs by utilizing these plastic column covers.

Bollard Cover Sizing

Tue, 16 Feb 2010 15:47:11 CST

Another way to measure your bollards or protector pipes for covers is to measure the circumference like measuring your waist:

Pipe Size	Sleeve ID	Circumference
3‐ 3 ½”	3 ¾ "	11 ½”
3 ½ ‐ 4”	4 ¼ "	12 ½”
4 – 4 ½”	5 "	14 ½”
5 ‐59/16”	5 ¾"	18”
6 – 6 5/8”	7"	21 ½”
7 – 7 5/16”	7 ¾"	23 ½”
8 – 8 5/8”	9"	28”
10 – 11”	10 ¾"	33”

Rack Deflektor Photos

Mon, 15 Feb 2010 16:28:59 CST

Additional RackDeflektor photos

Easy Installtion

Improves visability

Notches for low beams

National Time Management Month

Tue, 09 Feb 2010 10:19:06 CST

February is National Time Management Month, what a great way to save time by shopping for your Bollards, Rack protectors, Protective Rails, Guards for Dock Areas, and other great protective products here at column-protectors.indoff.com! We shop around the web, so you don't have to.

Heavy Duty Guard Rail Video

Mon, 08 Feb 2010 11:38:27 CST

Check out this column protector applcation video on You Tube

http://www.youtube.com/user/IdealShield

Applies to our HGR series , SGR series, and Vehicle Stopper Series of Rail Barrier Products.

Additional Bumperwrap Pictures

Thu, 03 Dec 2009 14:59:23 CST

Some additional applications for Bumperwrap™, an easy way to protect your facility and eliminate paint touch ups. Whether it's a column, pipe, or whatever you can get around.

Bumper Wrap Installation Instructions

Tue, 01 Dec 2009 10:36:15 CST

Step One – Measure the circumference of the object that you wish to wrap.

Step Two – Measure length of Bumperwrap™ to match the circumference of
the object, and cut to the determined length. A sharp utility knife or
heavy-duty scissors will work well for cutting Bumperwrap™. For best
results, use a metal framing square or similar tool to ensure a square cut.
Check the length by wrapping the cut piece tight around the object,
leaving ½” gap for the fasteners. When wrapping the same size object in
several applications, complete first installation to check for a good fit.

Step Three - Feed the fasteners through Bumperwrap™. Four straps or cable ties are recommended for most applications. On small poles, more fasteners may be required. For installations of 48” or less, use heavy duty cable ties. For longer installations use ½” pallet banding (plastic strap and buckles).

(Silicone spray can be used to aid in sliding the attachment banding into Bumperwrap™)

Step Four – Apply the material at the optimum height for vehicle protection
and visibility. Multiple layers of 12” Bumperwrap™ can be applied to
achieve 24” or more of protection.